References - Siemens CP 343-1 Manual

References

Finding the SIMATIC NET documentation
● Catalogs
You will find the order numbers for the Siemens products of relevance here in the
following catalogs:
– SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
– SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog
You can request the catalogs and additional information from your Siemens
representative.
You can go to the Industry Mall on the Internet at the following address:
Link: (https://eb.automation.siemens.com/goos/catalog)
● Documentation on the Internet
You will find SIMATIC NET manuals on the Internet pages of Siemens Automation
Customer Support:
Link: (http://support.automation.siemens.com/WW/view/en/10805878)
Go to the required product group and make the following settings:
"Entry list" tab, Entry type "Manuals / Operating Instructions"
● Documentation from the STEP 7 installation
Manuals that are included in the online documentation of the STEP 7 installation on your
PG/PC can be found in the start menu ("Start" > "All Programs" > "Siemens Automation"
> "Documentation").
B.1 On configuring, commissioning and using the CP
/1/
SIMATIC NET
S7 CPs for Industrial Ethernet
Configuring and Commissioning
Manual Part A - General Applications
Configuration Manual
Siemens AG
30374198 (http://support.automation.siemens.com/WW/view/en/30374198)
CP 343-1
Manual, 12/2018, C79000−G8976−C201-08
ST 70
B
71