Siemens CP 343-1 Manual page 5

Structure of the documentation
The documentation for this device consists of the following parts:
● Manual Part A: Configuration manual "Configuring and Commissioning S7CPs for
Industrial Ethernet", see references /1/ (Page 71).
● Manual Part B: Manual "CP 343-1" (this manual)
● Program blocks for SIMATIC NET S7 CPs - programming manual, see references /10/
(Page 73)
Contains the detailed description of the program blocks for the following services:
– Open communication services
– Access coordination with FETCH/WRITE
– Connection and system diagnostics
– Programmed connections and IP configuration
– PROFINET IO
Current manual release on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Automation Customer Support under the following entry ID:
Link: (http://support.automation.siemens.com/WW/view/en/24485272)
CP documentation in the Manual Collection (order no. A5E00069051)
The "SIMATIC NET Manual Collection" DVD contains the device manuals and descriptions
of all SIMATIC NET products current at the time it was created. It is updated at regular
intervals.
Version History / Current Downloads for the SIMATIC NET S7 CPs
The "Version History/Current Downloads for SIMATIC NET S7 CPs" provides information on
all CPs available up to now for SIMATIC S7 (Industrial Ethernet, PROFIBUS and IE/PB
Link).
An up-to-date version of this document can be found at on the Internet under the entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109474421)
License conditions
Note
Open source software
The product contains open source software. Read the license conditions for open source
software carefully before using the product.
CP 343-1
Manual, 12/2018, C79000−G8976−C201-08
Preface
5