Standard Horizon Eclipse GX1400GPS Owner's Manual page 80

3. Press the [▲]/[▼]/[◄]/[►] key to select the
first digit of the reset password, then press the
[SELECT] soft key to step to the next number.
4. Repeat steps 3 until the reset password is
complete.
If a mistake was made entering in the station name,
press the [▲]/[▼]/[◄]/[►] key to select "←" or
"→", press the [SELECT] soft key until the wrong
character is selected, then perform step 3.
5. Press the [FINISH] soft key.
If the reset is successful, "COMPLETE" will appear
on the screen.
If the error message is displayed, input the reset
code again.
6. Press the [OK] soft key to return to setup screen.
The acquired reset password is available only one time.
78
NOTE
USER MMSI RESET
<PASS CODE>
_ _ _ _ _ - _ _ _ _ _
BACK FINISH SELECT
USER MMSI RESET
COMPLETE
OK