Reset; Reset The User Mmsi And Atis Code - Standard Horizon Eclipse GX1400GPS Owner's Manual

11.5.5 Reset

You may reset the memory and settings of the setup categories independently
or return the transceiver to the original factory setting.
[ ]  "SETUP"  "CONFIGURATION"  "RESET"
1.
2. Press the [▲] or [▼] key to select the desired
category. You can select one from "DSC SETUP",
"CH SETUP", "GPS SETUP","CONFIGURATION",
"FACTORY"*
"ATIS"* will be initialized), "USER MMSI", or "ATIS
2
CODE"* .
2
*1 Depending on the radio setting.
*2 GX1400GPS/E only
For details on resetting "USER MMSI" and "ATIS
CODE", refer to next section.
3. Press the [SELECT] soft key.
4. Press the [YES] soft key. (To cancel, press the
[NO] soft key.)
5. Press the [OK] soft key.
6. Press the [CLR] key to return to radio operation.

11.5.6 Reset the USER MMSI and ATIS CODE

If the MMSI number and ATIS* code (*:GX1400GPS/E only) need to be reset.
Please contact Standard Horizon to obtain the required reset codes.
To request the Reset Code
Contact Standard Horizon and confirm the following required information.
● The Information Necessary to obtain the Reset Code
• Model name
• Serial number
• Current MMSI number or/and ATIS code
(To check the MMSI number and ATIS code, refer to "8.6.1 Mari-
time Mobile Service Identity (MMSI)" or "11.3.1 ATIS Code Setup
(GX1400GPS/E only)".
• Request codes for the MMSI number or/and the ATIS code
76
(all settings except the "MMSI" and
1
RESET
DSC SETUP
CH SETUP
GPS SETUP
CONFIGURATION
BACK SELECT
RESET
DSC SETUP
DO you want to
reset it?
YES NO
RESET
DSC SETUP
COMPLETE!
OK