Programming Scan Memory; Memory Scanning (M-Scan) - Standard Horizon Eclipse GX1400GPS Owner's Manual

9.10.2 Programming Scan Memory

[ ]  "SETUP"  "CHANNEL SETUP"  "SCAN MEMORY"
1.
2. Press the [▲] or [▼] key to select a desired
channel to be scanned, then press the [MEM]
soft key. The "MEM" icon appears on the display,
which indicates the channel has been selected to
the scan channel.
3. Repeat step 2 for all the desired channels to be
scanned.
4. To delete a channel from the list, select the channel
then press the [MEM] soft key again. The "MEM"
icon disappears from the display.
5. Press the [CLR] key to return to radio operation.

9.10.3 Memory Scanning (M-SCAN)

1. Set the scan type to "MEMORY SCAN" in the SETUP menu (refer to "9.10.1
Selecting the Scan Type").
2. Adjust the SQL knob until background noise disappears.
3. Press one of the soft keys.
4. Press the [◄] or [►] key repeatedly, until the
[P-SET] soft key display, then press the [SCAN]
soft key. The "M-SCN" icon appears on the LCD.
Scanning will proceed from the lowest to the
highest programmed channel number and will stop
on a channel when a transmission is received.
5. The channel number will blink during reception.
6. To stop scanning, press the [16/S] key or press one of the soft keys, then
press the [ SCAN] soft key.
30
SCAN MEMORY
CH: 16 MEM
CH: 17 MEM
CH: 1018
CH: 1019 MEM
BACK MEM
16
BUSY M
M-SCN
P-SET
P
USA
25W