Table of Contents
Advertisement
6. If a mistake was made entering in the position and
time, press the [◄] or [►] key until the wrong letter
is highlighted, then press the [▲] or [▼] key to
correct the entry and press the [SELECT] soft key.
7. When finished programming the position informa-
tion, press the [FINISH] soft key.
8. Press the [OK] soft key to return to the MENU screen.
Press the [POS/TM] soft key to display the position input screen again.
9. Press the [16/S] key or press the [CLR] soft key to return to radio opera-
tion mode.
10.9 AUTO POS POLLING
The GX1400 series has the capability to automatically track 6 stations
programmed into the individual directory.
10.9.1 Setting up the Polling Call Type
[
] "SETUP" "DSC SETUP" "AUTO POS POLLING"
1.
2. Press the [▲] or [▼] key to select "POS REQUEST"
or "POS REPORT", then press the [ENTER] soft
key.
3. Press the [BACK] soft key to return to "DSC SETUP".
10.9.2 Setting up the Polling Time Interval
[
] "SETUP" "DSC SETUP" "AUTO POS TIME"
1.
2. Press the [▲] or [▼] key to select the desired
interval time, then press the [ENTER] soft key.
3. Press the [16/S] key or press the [CLR] soft key to return to radio opera-
tion mode.
MMSI/POS INPUT
POS: 23°56.890 N
123°56.890 W
TIME: 12:56UTC
BACK
FINISH
SELECT
MMSI/POS INFO
ID: 366901234
POS: 23°56.890 N
123°56.890 W
TIME: 12:56UTC
OK
POS/TM
AUTO POS POLLING
POS REQUEST
POS REPORT
BACK
ENTER
AUTO POS TIME
30 sec
1 min
2 min
3 min
BACK
ENTER
59
Hide quick links:
Advertisement
Table of Contents
