Standard Horizon Eclipse GX1400GPS Owner's Manual page 23

The transceiver has a GPS status display which shows
the satellites currently being received, along with a
graphical (bar-graph) representation of the relative
signal strengths from each of the satellites.
When the GPS reception is limited, such as the flush mounting of the
GX1400GPS and GX1400GPS/E, it is recommended to connect option-
al External GPS Antenna SCU-38 to GPS ANT connector on the rear
panel.
1. Press hold the [MENU] key to display the
"MENU".
2. Press the ▲ /▼/ ◄/► key to select "GPS", then
press the [SELECT] soft key.
The "GPS STATUS" screen will appear.
3. Press the [CLR] key to return to radio operation.
For the transceiver to properly show the GPS status page when an ex-
ternal GPS receiver or a chart plotter is connected, the external device
must be setup to output GSA and GSV NMEA 0183 sentences.
NOTE
NOTE
GPS STATUS
01 21 31
12 22 32
13 25 AS
15 28 --
23˚56.890N 09:56
123˚56.890W
AM
(GPS S d
tatuS iSPLay
BACK SELECT
LOC
)
21