New Leader L5034G4 Operator's Manual page 23

Header
Informational Decals
1. NOTICE: SPREAD PATTERN TESTING
To obtain optimal machine performance:
Spinner assembly and material fl ow divider have NOT been adjusted at the factory. Before
assembling unit, read and follow assembly instructions in the operation and maintenance manual
for this unit.
Before spreading material, spread pattern tests must be conducted to properly adjust the spread
pattern. Refer to the "How to Check your Spread Pattern" manual for adjustment instructions. A
spread pattern test kit is available from your New Leader dealer.
Wind, humidity, rain and other adverse weather conditions can affect spread pattern, resulting in
uneven crop growth and loss of yields.
THE MANUFACTURER OF THIS SPREADER WILL NOT BE LIABLE FOR MISAPPLIED MATERIAL
DUE TO AN IMPROPERLY ADJUSTED SPREADER OR ADVERSE WEATHER CONDITIONS.
It is recommended that spread pattern tests be conducted prior to each spreading season, after
any spreader maintenance, and periodically during the spreading season. Spread pattern tests
must be conducted whenever a new product is to be applied.
www.NewLeader.com
(800) 363-1771
- 23 -
L5034G4
1 1
71526-F
305438-I