New Leader L5034G4 Operator's Manual page 15

Header
General Safety Rules
Maintenance
HANDLE FLAMMABLE SOLVENTS SAFELY
Figure 3.4 - Never use diesel fuel, kerosene, gasoline or any
fl ammable solvents for cleaning.
Perform work using fl ammable fl uids and solvents in a safe place away
from open fl ame and sparks. Do not smoke.
Do not weld, grind or fl ame cut on any tank containing oil, fuel, fumes
or any other fl ammable material, or any container that contents or
previous contents are unknown. Move all fl ammable materials and
containers away from work area.
Clean up spilled fuel and oil immediately.
Always have a multipurpose dry chemical fi re extinguisher fi lled and available. Know how to use it.
USE PROPER LIFTING EQUIPMENT
Figure 3.5 - Use only lifting devices that meet or exceed OSHA
standard 1910.184 or ASME B30.20-2013 .
Never lift equipment over people.
Never lift a loaded unit. Never lift unit with any loose objects or
persons in the body. Loads may shift or fall if improperly supported,
causing death, serious injury or machine damage.
Before unfastening heavy parts or assemblies, support with adequate
hoist or other device to prevent falling, tipping, swinging or any other
movement that may cause injury or damage.
USE PROPER TOOLS FOR THE JOB
Figure 3.6 - Use of improper tools (such as a screwdriver instead of a
pry bar, pliers instead of a wrench, a wrench instead of a hammer) can
cause serious injuries or machine damage.
Use power tools only to loosen threaded parts and fasteners. Using
power tools to tighten may cause over-tightening and component
damage.
Use only service parts meeting New Leader specifi cations.
www.NewLeader.com
(800) 363-1771
- 15 -
L5034G4
Figure 3.4
Figure 3.5
Figure 3.6
305438-I