Pilz PNOZ Seies Configuration Manual page 197

Products
Expansion modules
PNOZ mc9p
Installation
The safety system should be in-
stalled in a control cabinet with a
protection type of at least IP54. Fit
the safety system to a horizontal
DIN rail. The venting slots must face
upward and downward. Other
mounting positions could damage
the safety system.
Use the notches on the back of the
unit to attach it to a DIN rail. Con-
nect the safety system to the DIN
rail in an upright position, so that
the earthing springs on the safety
system are pressed on to the DIN
rail.
To comply with EMC requirements,
the DIN rail must have a low imped-
ance connection to the control cab-
inet housing.
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Terminal configuration
Dimensions
NSG-D-2-402-2006-11
2.3-115
2.3