Pnoz Mc7P - Pilz PNOZ Seies Configuration Manual

Products
Expansion modules

PNOZ mc7p

PNOZ mc7p Expansion modules Products NSG-D-2-378-2006-02 2.3 PNOZ mc7p PNOZ mc7p
Expansion module for connection to a
base unit from the PNOZmulti modular
safety system
Approvals
PNOZ mc7p
Block diagram
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Unit features
Can be configured in the PNOZmul-
ti Configurator
Connection for CC-Link
Station addresses from 0 ... 63, se-
lected via rotary switch
Status indicators for communica-
tion with CC-Link and for errors
Max. 1 PNOZ mc7p units can be
connected to the base unit
Station type: Remote Device
Assigned stations: 2
A maximum of 24 outputs on the
PNOZmulti safety system can be
defined in the PNOZmulti Configu-
rator for communication with CC-
Link.
Unit description
The expansion module may only be
connected to a base unit from the
PNOZmulti modular safety system.
It connects the PNOZmulti modular
safety system to CC-Link.
The PNOZmulti modular safety system
is used for the safety-related interrup-
tion of safety circuits.
The unit is designed for use in:
Emergency stop equipment
Safety circuits in accordance with
VDE 0113 Part 1 and EN 60204-1
The PNOZ mc7p expansion module is
used for communication between the
PNOZmulti modular safety system and
CC-Link.
CC-Link is designed for fast data ex-
change at field level. The expansion
module PNOZ mc7p is a passive CC-
Link subscriber (Slave). The basic
communication functions conform to
CC-Link Ver.1.10. The central control-
ler (Master) reads input information
from the slaves and writes output in-
formation to the slaves as part of each
cycle. As well as the cyclical transfer of
usable data, CC-Link can also be used
for diagnostics and commissioning
functions.
The expansion module may not be
used for safety-related functions.
System requirements
PNOZmulti Configurator: From Ver-
sion 3.0.0
Base unit PNOZ m1p: From Version
3.0
Please contact Pilz if you have an older
version.
NSG-D-2-378-2006-02
2.3
2.3-105