Assign Ip Address Via The Display - Siemens SIMATIC S7-1500 Getting Started

2.4.3

Assign IP address via the display

In this step you set the IP address and the subnet mask for the CPU.
Procedure
1. Navigate to "Settings".
2. Select "Addresses".
3. Select the interface "X1 (IE/PN)".
4. Select the menu item "IP Addresses".
5. Set the IP address 192.168.0.10.
6. Press the "right" arrow key on the module.
7. Set the subnet mask 255.255.255.0.
8. Press the "down" arrow key on the module to select the menu item "Apply" and confirm
Result
You have now assigned an IP address and the subnet mask for the interface "X1 (IE/PN)".
S7-1500
Getting Started, 05/2014, A5E03981761-AC
the setting with "OK"
Hardware section
2.4 Power on
33