Wiring The Load Current Supply (Pm) To The Cpu - Siemens SIMATIC S7-1500 Getting Started

Hardware section
2.3 Wiring
2.3.4

Wiring the load current supply (PM) to the CPU

Procedure
1. Wire the 4-pin connector plug of the load current supply (PM).
2. Wire the 4-pin connector plug with the 4-pin mains connection plug of the CPU.
3. Connect the load current supply (PM) to the CPU.
Result
The load current supply is now wired to the CPU.
24
Getting Started, 05/2014, A5E03981761-AC
S7-1500