Setup - Toro Workman 07390 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Operator Training Material
CVT Kit 121-9853
CVT Adapter 127-8750
Note:
Determine the left and right side of the machine from the normal operating position.
Description
Steering wheel
Cover
Washer (5/8 inch)
No parts required
No parts required
Roll bar
Flange-head bolt (1/2 x 1-1/4 inches)
No parts required
No parts required
Qty.
1
1
1
–
–
1
6
–
–
Qty.
1 Read before operating the machine.
1
View before operating the machine.
1 Connect the CVT Intake Duct (TC Models Only)
1 Connect the CVT Intake Duct (TC Models Only)
11
Use
Install the steering wheel (TC models
only).
Connect the battery (TC models only).
Check the fluid levels and tire pressure.
Install the roll bar.
Connect the continuously-variable
transmission intake duct.
Burnish the brakes.
Use