Controls System Maintenance; Converting The Speedometer - Toro Workman 07390 Operator's Manual

Controls System
Maintenance
Converting the
Speedometer
You can convert the speedometer from mph to kpm
or kph to mph.
1. Position the machine on a level surface, shut
off the engine, engage the parking brake, and
remove the key.
2. Remove the hood.
3. Locate the 2 loose wires next to the meter
(Figure 78).
Figure 78
1. Meter (forward face)
2. Plug
4. Remove the connector plug from the harness
wire and connect the wires together
Note:
The meter switches from mph to
kph. Retain the plug in order to convert the
speedometer to mph.
5. Install the hood.
g024896
3. Speedometer wires
(Figure 78).
58