Single O-Ring Seal; Double O-Ring Seal - Johnson Pump Top Wing Series Manual

4.7.8.4

Single O-ring seal

1. Fit O-rings (0085) and (0183) in
support ring (0097). Place support
ring with O-rings into the rotor
case. Ensure that the pin in the
rotor case fits into the groove in
the support ring.
2. Place O-ring (0082) on the shaft
sleeve (0130). Place shaft sleeve
with O-ring into the rotor. Ensure
that the pins in the rotor are
fitting into the grooves of the
shaft sleeve.
3. Rotor and shaft sleeve should be
assembled together.
4.7.8.5

Double O-ring seal

1. Fit O-rings (0085) and (0183) in
support ring (0097). Place support
ring with O-rings into the rotor
case.
Ensure that the pin in the rotor
case fits into the groove in the
support ring.
2. Place O-ring (0082) on the shaft
sleeve (0130). Place shaft sleeve
with O-ring into the rotor. Ensure
that the pins in the rotor are
fitting into the grooves of the
shaft sleeve.
3. Rotor and shaft sleeve should be
assembled together.
A.0500.301/314.C – IM-TW/10.00 GB (0401)
0085
0130
0082
0183
0097
0183
0085
0082
0130 0085
0082
0183
0097
0183
0085
0082
0183
0085
49