Single O-Ring Seal; Double O-Ring Seal - Johnson Pump Top Wing Series Manual

4.6.2.4

Single O-ring seal

1. Remove the shaft sleeve (0130)
from the shaft and O-ring (0082)
from the rotor.
2. Remove the support ring (0097)
together with O-ring (0085) and
O-ring (0183) from the rotor case.
The support ring can be pushed
out from the backside via the
access opening in the rotor case
(TW2-4).
On TW 1, please use special tool,
see section 5.7.
3. Remove the O-rings (0183) and
(0085) from the support ring
(0097).
4.6.2.5

Double O-ring seal

1. Remove the shaft sleeve (0130)
from the shaft and O-ring (0082)
from the rotor.
2. Remove the support ring (0097)
together with O-rings (0085) and
(0183) from the rotor case. The
support ring can be pushed out
from the backside via the access
opening in the rotor case
(TW2-4).
On TW 1, please use special tool,
see section 5.7.
3. Remove the O-rings (0183) and
(0085) from the support ring
(0097).
36
0085
0130
0082
0183
0097
0183
0085
0082
0130 0085
0082
0183
0097
0183
0085
0082
A.0500.301/314.C – IM-TW/10.00 GB (0401)
Push out
0183
0085