VESPA LX 150 4T Euro 3 Service Station Manual page 38

Table of Contents

Advertisement

Troubleshooting
Electrical system
Battery
Possible Cause
Battery
Turn signal lights malfunction
Possible Cause
Electronic ignition device failure
Steering and suspensions
Heavy steering
Possible Cause
Steering hardening
Excessive steering play
Possible Cause
Excessive steering clearance
TROUBL - 38
BATTERY
The battery is the electrical device in the system that requires
the most frequent inspections and thorough maintenance. If the
vehicle is not used for some time (1 month or more) the battery
completely in the course of 5 to 6 months. If the battery is fitted
on a motorcycle, be careful not to invert the connections, keep-
negative terminal while the red wire is connected to the terminal
marked+. Follow the instructions in the ELECTRICAL SYSTEM
TURN INDICATORS NOT WORKING
With the ignition switch set to "ON" jump the contacts 1 (Blue-
steadily on, replace the control unit; otherwise, check the cable
STEERING HARDENING
Check the tightening of the top and bottom ring nuts. If irregu-
larities continue in turning the steering even after making the
above adjustments, check the seats in which the ball bearings
rotate: if they are recessed or if the balls are squashed, replace
EXCESSIVE STEERING CLEARANCE
Check the tightening of the top ring nut. If irregularities continue
Vespa LX 125 - 150 4T Euro 3
Operation
needs to be recharged periodically. The battery runs down
ing in mind that the black ground wire is connected to the
chapter for the recharging of the batteries.
Operation
Black) and 5 (Orange) on the control unit connector.
If by operating the turn indicators control the lights are not
harness and the switch.
Operation
them.
Operation
in turning the steering even after making the above adjust-
ments, check the seats in which the ball bearings rotate: re-
place if they are recessed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx 125 4t euro 3

Table of Contents