VESPA LX 150 4T Euro 3 Service Station Manual page 75

Vespa LX 125 - 150 4T Euro 3
Recommended products
AGIP GREASE MU3 Yellow-brown, lithium-
base, medium-fibre multipurpose grease.
ISO L-X-BCHA 3 - DIN 51 825 K3K -20
- Operating the starter lever, load the spring and
introduce the pinion in its seat.
- Refit the intake throat with the 3 screws and the
Kick-starter cover with the 4 screws. Tighten the
screws to the prescribed torque.
- Remove the start-up pinion pushing the starter
lever.
- Unscrew the kick starter screw, remove the lever.
-Remove the seeger ring and the washer indicated
in the figure.
-Pull out the toothed section.
WARNING
THE SECTION KEEPS THE SPRING SET, BE CAREFUL SO
AS NOT TO CAUSE ANY ACCIDENTS
Air duct
- Unscrew the Torx screws fixing the air duct bulk-
head and remove the bulkhead.
- Remove the 3 screws, then take out the duct as
well as the filter.
Engine
ENG - 75