Engine from vehicle
- Remove the protection sheath indicated in the
figure and disconnect the automatic starter, the
carburettor heater and the TPS connectors (150
cm³ version only: disconnect the solenoid valve
connector from the MAJ2 control).
- Unscrew the engine pin-swinging arm nut on the
right-hand side of the vehicle and slide off the pin
on the left hand side
- Support the vehicle adequately (with a jack) and
remove the shock absorber lower clamping. The
engine is now free.
ENG VE - 72
Vespa LX 125 - 150 4T Euro 3