Menu 206 Selecting Battery Capacity Indication; Menu 207 Setting Standby-On Period - Sony DSR-370K1 Operating Instructions Manual

VCR Menu Operation
1
Display menu 204.
The menu number and the current frame mode
setting are shown.
Example: dF (drop-frame mode)
Blinking
Frame mode indication
If the setting does not need to be changed, press
the MENU button to close the menu.
2
Press the SHIFT button to make the frame mode
start blinking, then press the ADVANCE button.
This switches the frame mode display as shown
below.
Example: ndF (non-drop-frame mode)
Blinking
3
Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and the display window
returns to the display shown before the VCR menu.
Selecting Battery
Menu 206
Capacity Indication
This selects the indication type of battery capacity.
1
Display menu 206.
The selected menu number is displayed, along with
the name of the currently selected battery.
Example: nIcd (Indication for the NP-1B/BP-
90A)
Blinking
Selected battery capacity
indication
120
Chapter 5 Adjustments and Settings
If the setting does not need to be changed, press
the MENU button to close the menu.
2
Press the SHIFT button until the desired battery
name is displayed, then press the ADVANCE
button.
Pressing the ADVANCE button cycles through the
following indications.
nIcd y LI y nI-H y Antn y Auto
Indication Meaning
Automatic detection of battery
Auto
type.
(factory setting)
nIcd Indication for NP-1B/BP-90A
battery is selected.
Indication for BP-L40/L40A/L60/
LI
L60A/L90/L90A battery is
selected.
Indication for BP-M50/M100
nI-H
battery is selected.
Antn Indication for Anton Bauer
Magnum battery is selected
a) To use the Anton Bauer Magnum Battery System, a
special battery mount developed by Anton Bauer
Corporation is required.
For details, contact an Anton Bauer dealer or your
Sony dealer.
3
Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and the display window
returns to the display shown before the VCR menu.
Setting Standby-On
Menu 207
Period
At recording pause state, the camcorder waits for a
certain standby-on period and then automatically
switches to standby-off mode. This standby-on period
can be set in advance.
1
Display menu 207.
The selected menu number is displayed, along with
the current standby-on period setting (in minutes).
a)
.