Sony DSR-370K1 Operating Instructions Manual page 95

Basic menu page 7
Item
Settings
MARK/CUE MARK (normal value), CUE
Selects Mark mode See "ClipLink Shooting" (page 77).
or Cue mode
CHG REEL NO. See "To set the cassette name/
Sets the cassette number" below.
name/number
To set the cassette name/number
Note
When using a cassette without cassette memory, you
cannot set the cassette name or number.
1
Load a cassette.
2
Press the MENU switch to move the cursor to
CHG REEL NO., then press the MENU dial.
The cursor (→) changes to the text entry arrow (↓)
and the current cassette name/number is displayed.
("NO TAPE" is displayed if you neglected to load
a cassette.)
3
4
5
6
7
Current cassette
name/number
Turn the MENU dial until the desired character
appears, and press it.
The character cycles through the following
sequence.
Turn the MENU dial to move the text entry arrow.
Return to step 3 and repeat the text entry
procedure.
After completing text entry, move the text entry
cursor to the parenthesis position.
The display changes as follows.
Check your cassette name/number setting, and
press the MENU dial if no more changes are
required. (To make changes or to abort the
procedure for this setting, return to step 2.)
This writes the new cassette name/number to the
cassette memory, after which the display changes
as follows.
Chapter 4 Viewfinder Screen Indications and Menus
(Space)
95