Sony DSR-370K1 Operating Instructions Manual page 61

1
Set the POWER switch to ON and check the
following items in the display window.
Item to check
How is the battery?
Has the lithium battery
been inserted and is it
charged?
Is there a condensation
problem?
2
Press the EJECT button to open the cassette
holder, and insert the cassette.
Make sure that the cassette's REC/SAVE switch is
set to REC, then check for tape slack before
loading the cassette.
For details on handling cassettes, see "Usable
Cassettes" on page 59.
Inserting a standard-size cassette
Cassette holder window
Insert the cassette with the cassette window (on the front)
facing outward.
Indication and steps
BATT E [xxxxxx] F: The battery is fully charged.
If two or fewer marks appear and the indication is blinking,
replace the battery.
Make sure that the is not shown in the display
Li
window. If it is shown, replace the lithium battery.
Make sure that the "HUMID" indication is not shown in the
display window. If it is shown, do not use the equipment until
the "HUMID" indication disappears.
PUSH
Indication "PUSH"
See also
"8 Display window" (page 19)
"Inserting and Replacing the
Lithium Battery" (page 37)
"Condensation" (page 143)
Inserting a mini-size cassette
Guides
Insert the cassette with the cassette window (on the front) facing
outward. Push the cassette between the both guides along the
stage until it goes under the lock.
Press "PUSH" on the cassette holder solidly to
close the holder.
Stage
PUSH
Indication "PUSH"
Cassette holder window
Mini-size cassette
match marks
Lock
(Continued)
61
Chapter 3 Shooting