Sony DSR-370K1 Operating Instructions Manual page 102

Viewfinder Advanced Menu
Advanced menu page 4
a) For DSR-370P/570WSP: 70%
Item
MARKER CENT/90% (normal value):
Selects ON/OFF Displays center marker and safety
setting for center zone marker at 90% size.
marker, size setting, CENT/80%: Displays center
and display ON/OFF marker and safety zone marker at
setting. 80% size.
90%: Displays only safety zone
The safety zone value
marker at 90% size.
differs as follows,
80%: Displays only safety zone
depending on the
marker at 80% size.
LIMITS setting.
CENT: Displays only center
LIMITS set to OFF: %
marker.
value with respect to
viewfinder screen
LIMITS set to value
other than OFF: %
value with respect to
LIMITS value
LIMITS DSR-570WS/
• 16:9 mode
570WSP
OFF (normal value): Outputs
safety zone according to scan size.
4:3: 4:3 section safety zone
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
• 4:3 mode
OFF (normal value): Outputs
safety zone according to scan size.
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
16:9: 16:9 section safety zone
DSR-370/
OFF (normal value): Outputs safety
370P
zone according to scan size.
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
16:9: 16:9 section safety zone
102
Chapter 4 Viewfinder Screen Indications and Menus
a)
Settings
Item
ZEBRA 1 (normal value): Displays the
Selects type of zebra zebra pattern over parts having a
pattern display. video level. between 70 and 90
IRE (or 70 and 90%).
Use the next item (ZEBRA1) to
select the base level.
2: Displays the zebra pattern over
parts having video levels of 100
IRE or above (or 100% or above).
1/2: Dual display (both 1 and 2)
70 IRE (normal value) to 90 IRE
ZEBRA1
(DSR-370/570WS) or 70%
Sets base level for
(normal value) to 90% (DSR-
zebra pattern 1.
370P/570WSP):
Can be set for each IRE step or
1% step.
REC TIME INT (normal value): Recording
Selects whether to
time of the internal VCR
show the recording EXT: Recording time of the
time (TTL) of the
external VCR connected to the
internal VCR or of the
VTR/CCU connector (26-pin) or
external VCR.
DV OUT connector.
×1: Uses only the upper REC/
VF TALLY
Selects whether or not TALLY indicator.
×2 (normal value): Uses two
to use more than one
REC/TALLY indicators REC/TALLY indicators.
in the viewfinder
(displayed only when
the DXF-801/801CE
viewfinder is attached).
LENS SEL
1 (normal value), 2,3,4
Select the types of the For details, see "Designating the
lens. lens" on page 134.
Settings