Sony DSR-370K1 Operating Instructions Manual page 104

Viewfinder Advanced Menu
2
Press and turn the MENU dial to move the text
entry arrow.
Turn the MENU dial downward to move the cursor
to the right, or upward to move it to the left.
3
Press and turn the MENU dial to enter the desired
characters.
The displayed character changes as you turn the
dial.
4
Return to step 2 and repeat the text entry
procedure.
5
When you have finished entering the text, press
and turn the MENU dial to move the cursor to the
parenthesis position.
This clears the displayed menu and returns to the
normal indications.
Advanced menu page 7
a) At shipping, the EZ MODE is set to STD.
Item
EZ MODE
When the EZ MODE button
has been set to EZ mode
ON, this selects whether or
not to change the settings of
other switches and menus to
the standard settings. (The
EZ mode function cannot be
used during remote
operation.)
A.IRIS-AGC
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
104
Chapter 4 Viewfinder Screen Indications and Menus
Settings
STD (normal value):
Changes settings to
standard settings.
CUSTOM: Changes only
some settings to standard
settings.
For details of the settings
when STD or CUSTOM is
specified, see "EZ mode
settings" below.
• DSR-570WS/570WSP
OPEN, F2.8 (normal value),
F4, F5.6
• DSR-370/370P
OPEN, F2, F2.8 (normal
value), F4, F5.6
Item
A.IRIS-AE
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
AGC LIMIT
Sets an upper limit value for
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).
EZ mode settings
The following settings are set for the camcorder when
EZ mode has been selected.
Item
Settings
STD
Setup file STD
Detail level ±0
Master black ±0
Black stretch ±0
Skin detail OFF
Shutter OFF (AE mode) OFF (AE mode)
Freeze mix OFF
Gain AGC mode
Hyper gain OFF
Iris control method Automatic
Auto iris control STD
mode
Iris override ±0
Color bar output Not output
AGC upper limit 12dB
AGC's F-stop value F2.8
AE's F-stop value F16
ATW ON
DynaLatitude OFF
ON
DCC+
F-stop value
ON
indication
Filter indication
ON
Clock indication OFF
Settings
F5.6 , F8, F11, F16 (normal
value)
0, 3, 6, 9, 12 dB (normal
value)
CUSTOM
Selectable
Selectable
Selectable
Selectable
OFF
OFF
AGC mode
OFF
Automatic
STD
Selectable
Not output
Selectable
Selectable
Selectable
ON
OFF
ON
ON
ON
OFF