Using An Optional Microphone - Sony DSR-370K1 Operating Instructions Manual

Using an Optional Microphone

Fitting the optional CAC-12 Microphone Holder
Remove the two retaining screws (M3 × 8) for the
optional microphone holder, then use these screws to
Fitting an optional microphone
Use the following procedure to attach an optional
ECM-670 Microphone.
1
Loosen the screw of the CAC-
12 Microphone Holder, then
open the holder and replace the
microphone adaptor with the
one supplied with the ECM-
670 Microphone.
2
Insert the microphone in the
microphone holder, close the
holder, and tighten the screw.
Connect the microphone cable
to the MIC IN +48 V
connector.
CAC-12
attach the CAC-12 Microphone Holder.
Screws removed from the
camcorder
MIC IN +48 V connector
Microphone adaptor
Mark
Chapter 2 Fitting and Connections
43