Sony DSR-370K1 Operating Instructions Manual page 111

3
Access advanced menu page 13 (page 12 on DSR-
370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
4
Move the cursor to DESTINATION FILE with the
MENU switch and turn the MENU dial to select
USER1, USER2, or USER3.
5
Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
The display changes as shown below.
6
Press the MENU dial to store the file. To abort the
save operation, move the MENU dial (the display
returns to the one shown at step 4).
When the save operation is finished, the display
changes as shown below.
Currently
selected file a)
To save setup files to a tape
Load the tape onto which the file will be recorded.
1
Perform steps 1 to 4 of "Saving File Settings" and
select TAPE as the file saving destination.
File in which
current
settings are
to be stored
2
Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
The display changes as shown below.
(The following figure shows an example for the
DSR-570WS/570WSP.)
Chapter 4 Viewfinder Screen Indications and Menus
(Continued)
111