I、Default Setting; Set Custom Defaults; Recall Default; Interface Setting - geos SD 580 2D Setting Manual

I、Default Setting

1. Set Custom Defaults

2. Recall default

II、Interface setting

1. introduce

The RS232 Interface bar code is used when connecting to the serial port of a PC or
terminal. The following RS232 Interface bar code also programs a carriage return (CR)
and a line feed (LF) suffix, baud rate, and data format as indicated below. It also
changes the trigger mode to manual.

2. USB interface setting

After connecting the USB interface, USB device could be enumerated to virtual
keyboard, HID POS, USB com, IBM SurePos interface. The default is USB com
interface, if you need to set the scanner as other interfaces, please set as
following steps:
（1）USB PC
Connecting the WINDOWS PC and Scan the "USB PC Keyboard" setting
code, the scanner could be setting as the USB keyboard mode. This setting
will add return and line break after the scanned information, if you don't want
the suffix, please refer to the suffix setting chapter.
（2）USB APPLE Keyboard
If the scanner connect to the APPLE computer, please scan the USB APPLE
4
GEOS SD 580 2D
Set Custom Defaults
Recall Defualt
RS232 interface default
USB PC Keyboard Setting