Led; Power Save Mode - geos SD 580 2D Setting Manual

（4）Beep duration
* Beep 50ms

5. LED

The LED indicator can be programmed On or Off in response to a good read.
Default = On.
* LED Good read On
The number of good read beep and LED blink could be several times, and the
default is once. If you want to set more than once beep or LED blink, please
contact the distributor.。

6. Power Save mode

Engine power saving mode timeout. The scan engine will power saving mode
in idle after a certain period of time, if you do not let the engine for the power saving
mode can be set to "time out period" for 0ms. The default time is 120000ms. user
specified time. Specific operation is as follows: 1 sweep "time-out duration settings"
bar code; 2 sweep accessories digital value bar code (decimal length); 3 sweep
"save"
。
16
GEOS SD 580 2D
Time-out duration setting
Beep 20ms
LED Good read Off