geos SD 580 2D Setting Manual page 30

Validate and Transmit
Code39 Message Length
Scan the bar codes below to change the message length. Minimum and Maximum
lengths = 0-48. Minimum Default = 0, Maximum Default = 48.
Maximum Message length
Full ASCII On/Off
Full ASCII On
This function allows the scanner to append the data from several Code 39 bar codes
together before transmitting them to the host computer. When the scanner encounters a
Code 39 bar code with the append trigger character(s), it buffers Code 39 bar codes
until it reads a Code 39 bar code that does not have the append trigger. The data is then
transmitted in the order in which the bar codes were read (FIFO). Default = Off.
Code 39 Append On
30
GEOS SD 580 2D
Validate, but Don't Transmit
Minimum Message length
* Full ASCII Off
*Code 39 Append Off