Continue Scanning Mode; Cell Phone Mode; Presentation Time-Out - geos SD 580 2D Setting Manual

*LED Illumination On
②Presentation Sensitivity
Presentation Sensitivity is a numeric range that increases or decreases the scanner's
reaction time to bar code presentation. To set the sensitivity, scan the Sensitivity bar
code, then scan the degree of sensitivity (from 0-20) from the inside back cover, and
Save. 0 is the most sensitive setting, and 20 is the least sensitive. Default = 1.

9. Continue Scanning Mode

When in Continue Scanning Mode, the scanner's aimer goes out after a short time, but
the scan illumination remains on all the time to continuously search for bar codes.

10. Cell Phone Mode

When this mode is selected, your scanner is optimized to read bar codes from mobile
phone or other LED displays. However, the speed of scanning printed bar codes may
be slightly lower when this mode is enabled. You can enable Cell Phone Reading for
either a hand held device, or for a hands-free (presentation)
application.
Cell phone Mode- Hand Held

11. Presentation Time-Out

If the scanner's trigger is pulled when using a presentation mode, the scanner changes
to manual trigger mode. You can set the time the scanner should remain in manual
trigger mode by setting the Presentation Time-Out. Once the time-out value is reached,
19
GEOS SD 580 2D
Presentation Sensitivity
Continue Scanning Mode
LED Illumination Off
Cell Phone Mode – Hands free