Read Delay - geos SD 580 2D Setting Manual

GEOS SD 580 2D

7. Read delay

（1）Read delay duration setting
This sets the time period before the scanner can read the same bar code a second time.
Setting a reread delay protects against accidental rereads of the same bar code. Longer
delays are effective in minimizing accidental rereads. Use shorter delays in applications
where repetitive bar code scanning is required.
。
*No Delay
500ms Delay
1000ms Delay
1500ms Delay
（2）User Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below, then
set the delay (from 0-30,000 milliseconds)by scanning digits from the inside back cover,
then scanning Save.
User Specified Reread Delay
17