Intended Use; Specifications; Parts Of The Machine - Festool KAPEX KS 120 REB Original Instruction Manual

Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
The declared noise emission values
– have been measured in accordance with a
standard test method and may be used for
comparing one tool with another,
– may also be used in a preliminary assess­
ment of exposure.
CAUTION
The noise emissions during actual use of the
power tool can differ from the declared val­
ues depending on the ways in which the tool
is used especially what kind of workpiece is
processed.
► Identify safety measures to protect the op­
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
3

Intended use

The power tool is a stationary unit designed for
sawing blocks of wood, plastic, aluminium pro­
files and similar materials. Do not use it to
process other materials, in particular steel,
concrete and mineral materials.
Only use Festool saw blades that are designed
for use in this power tool.
The saw blades must comply with the following
data:
– Saw blade diameter 260 mm
– Cutting width 2.5 mm (corresponds to the
tooth width)
– Locating bore 30 mm
– Standard blade thickness 1.8 mm
– Saw blade in accordance with EN 847-1
– Saw blade with chip angle ≤ 0°
Festool saw blades for woodworking comply
with EN 847-1.
Only saw materials for which the relevant saw
blade has been designed.
This power tool may only be used by experts or
L = 88 dB(A)
PA
instructed persons.
L = 101 dB(A)
WA
K = 3 dB
ded use.
4
5
The user is liable for damage and acci­
dents caused by improper and non-inten­

Specifications

Mitre saw
Performance
220-240 V
110 V
Speed (idle)
Tool spindle dia.
Weight according to EPTA-Procedure 01:2014
KS 120 REB
KS 88 RE
For maximum workpiece dimensions see the
section <Working with the power tool>.

Parts of the machine

[1.1] Handle
[1.2] On/off switch
[1.3]
Safety lock
[1.4] Cutting depth limiter lever
[1.5]
Rotary knob for clamping the pulling
unit
[1.6] Transport lock
[1.7]
Scale for mitre angle (vertical)
[1.8] Extension table
[1.9]
Rotary knob for extension table
[1.10] Scale for mitre angle (horizontal)
[1.11] Clamping lever for mitre angle (hori­
zontal)
[1.12] Notch lever for preset mitre angle
(horizontal)
[1.13] Pendulum guard
[1.14] Rotary handle for precision adjust­
ment of mitre angle (vertical)*
[2.1]
On/off switch for laser*
[2.2] Speed adjusting wheel
[2.3]
FastFix spindle stop
English
KS 120 REB,
KS 88 RE
1600 W
1400 W
1400–3600 rpm
30 mm
24 kg
23 kg
23