Accessories; Environment - Festool KAPEX KS 120 REB Original Instruction Manual

► Loosen the screw [21.5] by approx. two ro­
tations.
► At the same time, push the window in direc­
tions [21.3] and [21.4].
► Remove the window.
► Clean the window or replace it with a new
one.
► Insert the cleaned/new window. The two
pins [21.1] of the window must engage in
the recesses of the upper guard as show in
figure 21.
► Tighten the screw [21.5].

10 Accessories

Use only original Festool accessories.
The PO numbers of the accessories and tools
can be found in the Festool catalogue or online
at "www.festool.co.uk".
In addition to the accessories described, Fes­
tool also provides a comprehensive range of
system accessories that allow you to use your
saw more effectively and in diverse applica­
tions, e.g.:
• Saw blades for different materials.
• KA-KS 120 table extension
• UG-KAPEX KS 120 underframe
• AB KS 120 crown stop

11 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with European Directive
2002/96/EC on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach
English
31