Skyrc T200 Instruction Manual page 13

2. Connecting the battery
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE
LEADS TO THE CHARGER FIRST, AND THEN TO THE BATTERY.
WARNING!
REVERSE THE SEQUENCE WHEN DISCONNECTING THE PACK.
1) LiPo Battery Connection
The balance wire of the battery must be connected to the charger. Always
remember to keep right polarity in the connection. Please refer to the wiring
diagram above,
which shows a correct way for your LiPo battery connection in
the balance charge mode.
In the other modes, there is no request to connect the balance wire to the
balance socket in the charger.
But we suggest to charge your battery in balance mode for better performance.
2) NiMH/NiCd or Pb Battery Connection
T200
Power and Battery Connection
LiPo
NiMH
11 ·