Skyrc T200 Instruction Manual page 9

Warning and Safety Notes
Attention should be paid to the connection of lithium battery especially.
Do not attempt to disassemble the battery pack arbitrarily.
Please get highlighted that lithium battery packs can be wired in parallel and in
series. In the parallel connection, the battery s capacity is calculated by
multiplying single battery capacity by the number of cells with total voltage stay
the same. The voltages imbalance may cause fire or explosion .Lithium battery is
recommended to charge in series.
Discharging
The main purpose of discharging is to clean residual capacity of the battery, or to
reduce the battery voltage to a defined level. The same attention should be paid
to the discharging process as charging. The final discharge voltage should be set
up correctly to avoid deep-discharging. Lithium battery can not be discharged to
lower than the minimum voltage, or it will cause a rapid loss of capacity or a total
failure. Generally, lithium battery doesn't need to be discharged. Please pay
attention to the minimum voltage of lithium battery to protect the battery.
Some rechargeable batteries have a memory effect. If they are partly used and
recharged before the whole charge is accomplished, they remember this and will
only use that part of their capacity next time. This is a memory effect. It is said
that NiCd and NiMH batteries are suffering from memory effect. NiCd has more
memory effect than NiMH.
T200 07 ·