Front Panel - Musicom Lab EFX MK-V Owner's Manual

1.4 Front Panel

1 through 5 switches
When in Preset mode these switches are used to recall the corresponding preset. When in IA1, IA2 or IA3
mode pressing these switch turn on/off the corresponding effect loop, function switches, ouputs and
buffers.
6/TAP switch
This Switch can have two functions based upon your needs. By default, this button is set up to access
the Preset 6, You can also program this switch to TAP TEMPO. Refer to the Activate/Deactivate TAP
Switch on the page 8 of the manual.
BANK & BANK
The 360 presets in the EFX MK-V are arranged in banks of 6, and these buttons allow you to select which
bank of 6 you'd like to access. Pressing this switch in Preset mode decrements/increments the bank
number.
IA1/SETUP
Pressing this switch puts the EFX MK-V into the IA1 mode, where you can turn individual loops on and off,
and store their settings to presets. For the other side, pressing this switch for 2 seconds puts the EFX
MK-V into the SETUP mode.
IA2/MUTE
Pressing this switch puts the EFX MK-V into the IA2 mode, where you can turn on function switches,
buffers, and outputs. For the other side, pressing this switch for 1 seconds mutes the audio signal.
LCD Display
Line 1 and 2 - a to d indicate a bank or song number
Line 1 - e to g indicate a BPM number of the selected preset.
Line 1 - i to x indicate a Preset or Song Title.
Line 2 - f indicates a preset number within the bank or song.
Line 2 - h to p indicate which of the 9 audio loops are currently active.
Line 2 - r and s indicate which of the two audio outputs are active.
Line 2 - u to x indicate which of the 4 function switches are currently active.
5
EFX MK-V Audio Controller Owner's Manual