Waiting Time Setting For The Sleep Mode - Vatech EzRay Air VEX-P300 User Manual

5.3.5

Waiting Time Setting for the Sleep Mode

Perform this mode to set up the waiting time that takes before the Sleep Mode is
started. (default: 1 minute)
To change the waiting time for the Sleep Mode,
Select n.19 by pressing the jog dial, then the default time "001" (1 minute) is
1.
displayed on the Control Panel as shown in the following figure (right).
2. The waiting time can be modified from 1 to 999 minutes.
Turn the jog dial to set the time, and save the setting.
3. Check if it has been correctly saved.
EzRay Air (Model: VEX-P300) User Manual
Service
Mode No.
n.19 Waiting time setting for the Sleep Mode
5. Service Mode
Item
53