How To Hold The Product; Connect To Line Power - Fluke Biomedical ESA614 Getting Started Manual

Electrical safety analyzer
Table of Contents

Advertisement

ESA614
Getting Started Manual

How to Hold the Product

When you move the Product, use the handle on the
bottom case to hold it. See Figure 3.
Figure 3. Product Handle
10

Connect to Line Power

To prevent possible electrical shock, fire, or
personal injury:
Do not use an extension cord or adapter
plug.
Make sure the ground conductor in the
mains power cord is connected to a
protective earth ground. Disruption of
the protective earth could put voltage on
the chassis that could cause death.
Replace the mains power cord if the
insulation is damaged or if the insulation
shows signs of wear.
Use only the mains power cord and
connector approved for the voltage and
plug configuration in your country and
rated for the Product.
Do not put the Product where access to
the mains power cord is blocked.
gtv122.eps
XWWarning

Advertisement

Table of Contents
loading

Table of Contents