Unpack The Product - Fluke Biomedical ESA614 Getting Started Manual

•
Make sure the ground conductor in the
mains power cord is connected to a
protective earth ground. Disruption of the
protective earth could put voltage on the
chassis that could cause death.
•
Replace the mains power cord if the
insulation is damaged or if the insulation
shows signs of wear.
•
Connect the common test lead before the
live test lead and remove the live test lead
before the common test lead.
•
Remove all probes, test leads, and
accessories that are not necessary for
the measurement.
• Disable the Product if it is damaged.
• Do not use the Product if it is damaged.
• Do not use the Product if it operates
incorrectly.
•
Use this Product indoors only.
• Use Product-approved measurement
category (CAT), voltage, and amperage
rated accessories (probes, test leads, and
adapters) for all measurements.
•
Do not put metal objects into connectors.
• Do not use exposed metal BNC or banana
plug connectors Limit operation to the
specified measurement category, voltage,
or amperage ratings.
•
Only use probes, test leads, and
accessories that have the same
measurement category, voltage, and
amperage ratings as the Product.

Unpack the Product

Carefully unpack all items from the box and check that you
have these items:
• ESA614
• Getting Started Manual
• Carrying Case
•
Power Cord
•
ESA USA Accessory Kit
•
Ansur Demo CD
•
Null Post Adapter
•
5-to-5 Banana to ECG Adapter (BJ2ECG)
• USB Transfer Cable
Electrical Safety Analyzer
Unpack the Product
5