Introduction
The IDA-1S Infusion Device Analyzer (the Product) is a portable, battery-
operated instrument that verifies the performance of medical infusion devices.
The Product measures the flow rate and volume delivered and the pressure
generated in occlusions or blockages of the fluid line.
Intended Use
The Product is to be used by infusion device manufacturers, hospital biomedical
engineering departments, and third-party service organizations. Use the Product
to verify accurate performance of infusion devices through measurement of flow,
volume, and pressure. The performance of a wide range of infusion devices can
be analyzed including syringe, drop counting, peristaltic, and volumetric types.
Non-steady flow rate pumps can also be analyzed. The Product uses distilled or
deionized water with an optional wetting agent only.
Unpack the Product
Carefully unpack all items from the box and check that these items are included:
•
The Product
•
Battery charger / power supply
•
Accessory Set:
o plastic syringe (20 ml)
o 3-way Luer plastic stop-cock
o extension tube, short (20 cm)
o drain tube (1 m)
o Micro-90
•
CD (contains Users Manual and HydroGraph software)
•
USB Cable
(100 ml)
1