CTEK D250S DUAL Manual page 11

SMARTPASS LAMP ERROR INDICATION
2 1 4
20020400A D250S Dual SMARTPASS manual EU_US, print file, Print file 001.indd 13
3 ExPLANATION
Service battery overheated
Too high current through or temperature
at internal relay. Too high Service bat-
tery charge current.
Too high current through or temperature
at internal relay. Too many consumers
connected at the same time.
Too high current through or temperature
at internal relay. Too high current to
starter battery.
Too high current through or temperature
at internal relay. Too many consumers
connected.
Battery watch activated. Service battery
too low
Steady lamp Flashing lamp
RECOMMENDATION
Check condition and/or installation
Check service battery. Reduce alternator size or
add one more D250S DUAL in parallel. Service bat-
tery bank too deeply discharged.
Consider relocation of unit. Reduce power usage.
Starter battery problems, check battery.
Relocate unit or reduce concurrent use of consumers.
Recharge Service battery
EN • 13
2013-12-02 13:47:03