C302
Shield Installation
(Nylon line head operation)
Parts required: Shield with Cut-off Knife.
Shield with cut-off knife is for use with the nylon line head only.
Install shield without cut-off knife when using plastic or metal
blades, or serious injury may result.
1.
Remove blade and blade mounting hardware if installed, and retain for
future use with blade conversions.
2.
Loosen bolt and nut (J, K)
holding shield without cutoff
knife to shield base.
3.
Press tab (L) and slide shield
off shield base.
4.
Slide shield with cut-off knife
(M) onto shield base. Secure
shield with bolt and nut (J,K)
X7502350403
© 05/22 ECHO Incorporated
J
L
K
L
J
K
M
ASSEMBLY
J
K
23