Bridge Configuration - NEC UX5000 Installation Manual

UX5000
___________________________________________________________________________________
___________________________________________________________________________________
Multimedia Conference Bridge Installation Manual
6.1.1.2

Bridge Configuration

The Bridge Configuration window, accessed from the
Conference Settings window, allows the administrator to
configure some of the Conference Bridge parameters.
Figure 5-14 Bridge Configuration Window
Conference Bridge Number: Enter the number for the
Conference Bridge.
Ports Capacity on Board: Select the number of ports for
which the application is licensed.
Reserved Ports for Present Conference: Enter the number
of ports that are reserved for preset conferences.
Max. Conf. Duration: Enter the maximum length of time for the
conference.
End Tone Alert Time: Enter the time that the end tone alert is
played. Conference participants hear a beep tone at the
stipulated time assigned in this field.
Use Custom Greeting: Check the box for this field if the
Conference Bridge is enabled to play a customized welcome
message instead of the factory default message.
✎
Use the Export/Import window to upload a customized
greeting to the Conference Bridge.
Issue 1.0
5 - 21