NEC UX5000 Installation Manual page 62

Issue 1.0
___________________________________________________________________________________
___________________________________________________________________________________
5 - 34
Organizer DTMF (Access Codes)
Make Call and Invite Participant: Dialing this code allows the
conference organizer to make an external call and invite a party
to join the conference. The organizer may need to share one of
the available passwords with the party to allow them to join the
conference.
✱
(Default = 10#)
✎
Password can be viewed (in view mode) from the Scheduled
Conference window. (Refer to
Conferences Window on page
Lock Conference: Dialing this code allows the conference
organizer to lock the conference. When a conference is locked,
participants trying to enter the conference are not allowed to
join even if have a valid conference password.
✱
(Default = 07#)
Mute/Unmute Participant: Dialing this code allows the
conference organizer to Mute/Unmute participants of the
conference.
✱
(Default = 02#)
Remove Participant: Dialing this code allows the conference
organizer to remove a conference participant forcefully from the
conference. To remove the participant from the conference, the
organizer must know the participant's password. The organizer
can obtain participant's passwords by doing a roll call of all the
logged in users.
✱
(Default = 03#)
Lecture/Discussion Mode: Dialing this code allows the
conference organizer to change/toggle between lecturer/
discussion conference modes. In discussion mode all the
participants of the conference can hear and talk with each
other. In lecturer mode only one participant, who is designated
as the lecturer, can talk while the rest of the participants will be
in the 'listen only' mode.
✱
(Default = 06#)
Assign Lecturer: Dialing this code allows the conference
organizer to assign one of the conference participants with
lecturer privileges.
✱
(Default = 08#)
Continue Conference: Dialing this code allows the
conference organizer to allow the conference to continue even
when they leave the conference. This operation sets a
parameter in the conference bridge that allows participants to
continue with the conference after the organizer exits from the
conference
✱
(Default = 04#)
Multimedia Conference Bridge Application Web Manager
UX5000
Figure 5-6 Scheduled
5-12.)