Recording a still image on a tape – Tape Photo recording
Self-timer tape photo recording
You can make a tape photo recording with the self-timer. You can also operate using
the Remote Commander.
(1) Set the POWER switch to CAMERA.
(2) Press FN and select PAGE3 (p. 16).
(3) Press SELFTIMER.
The
(self-timer) indicator appears on the LCD screen or in the viewfinder.
(4) Press PHOTO deeper.
Self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then the recording starts
automatically.
2
FN
To cancel the self-timer tape photo recording
Press SELFTIMER so that the
viewfinder while your camcorder is in the standby mode. You cannot cancel the self-
timer tape photo recording using the Remote Commander.
Note
The self-timer tape photo recording mode is automatically cancelled when:
•The self-timer tape photo recording is finished.
•The POWER switch is set to OFF or VCR.
4
indicator disappears from the LCD screen or the
4
PHOTO
1
33