Sony Handycam DCR-PC5 Operating Instructions Manual page 68

Dubbing only desired scenes – Digital program editing
If you connect using the i.LINK cable (DV connecting cable)
With digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
When you connect with the i.LINK cable (DV connecting cable)
You may not be able to operate the dubbing function correctly, depending on the VCR.
Keep the i.LINK connection, and follow the procedure from step 2 on page 61.
Operation 1: Making Programs
(1) Insert the tape for playback into your camcorder, and insert a tape for
(2) Press FN to display PAGE1 (p. 16).
(3) Select VIDEO EDIT in
(4) Search for the beginning of the first scene you want to insert using the video
(5) Press MARK IN on the LCD screen or MARK button on the Remote
(6) Search for the end of the first scene you want to insert using the video
(7) Press MARK OUT on the LCD screen or MARK button on the Remote
(8) Repeat steps 4 to 7.
68
recording into the VCR.
Then press EXEC.
operation buttons, then pause playback (p. 29).
Commander.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.
operation buttons, then pause playback (p. 29).
Commander.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
When one program is set, the program mark changes to light blue.
You can set 20 programs in maximum.
5~8
V I DEO ED I T
MARK START
OUT
TOTAL 0:00:00:00
SCENE 0
in the menu settings (p. 89).
3
OTHERS
BEEP
COMMANDER
D I SPLAY
V I DEO ED I T READY
ED I T SET
EXEC
V I DEO ED I T
0:08:55:06
UNDO MARK
I N
ERASE
ALL
TOTAL 0:00:12:13
SCENE 1
DV I N
END
EXIT
V I DEO ED I T
MARK
I N
TOTAL
SCENE
RET.
V I DEO ED I T
0:09:07:06
START UNDO MARK
I N
ERASE
ALL
TOTAL
DV I N
SCENE
END
0:32:30:14
START UNDO
ERASE
ALL
0:00:00:00
0 DV I N
END
0:10:01:23
START UNDO
ERASE
ALL
0:00:47:12
3 DV I N
END