Step 3 Using a touch panel
Your camcorder has operation buttons on the LCD screen. Touch the LCD panel
directly to operate each function.
In CAMERA/VCR mode
(1) Install the battery pack, or connect the AC adaptor for the power supply
(2) Set the POWER switch to CAMERA (in the standby/recording mode)/VCR (in
(3) Press OPEN to open the LCD panel.
(4) Press FN. Operation buttons appear on the LCD screen.
(5) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(6) Press PAGE3 to go to PAGE3. Operation buttons appear on the LCD screen.
(7) Press a desired operation item. Refer to relevant pages for each function.
5,6
To return to FN
Press EXIT.
To execute settings
Press EXEC or
To cancel settings
Press
16
(p. 10 to 14).
the playback mode) while pressing the small green button.
In CAMERA mode
PAGE1 PAGE2 PAGE3 EXIT
MENU
END
SCH
FADER DIG
MEM
EXPO–
EFFT
MIX
SURE
PAGE1 PAGE2 PAGE3 EXIT
TITLE
LCD
VOL
BRT
PAGE1 PAGE2 PAGE3 EXIT
SELF
TIMER
OK. The display returns to PAGE1/PAGE2/PAGE3.
OFF to return to PAGE1/PAGE2/PAGE3.
4
FN
3
2
POWER
LOCK
1