Additional Information; Using The Viewfinder - Sony Handycam DCR-PC5 Operating Instructions Manual

— Additional Information —

Using the viewfinder

You can operate with the touch panel using the viewfinder.
(1) In the CAMERA/memory camera mode, pull out the viewfinder until it clicks,
(2) Press the LCD screen. EXPOSURE,
(3) Select the desired item, then press
EXPOSURE: adjust the exposure by pressing –/+.
FADER: press FADER until the desired fader mode is displayed (p. 37).
To make the buttons on the LCD screen disappear
Press
Notes
• Do not touch the LCD screen with wet hands.
• Do not press the LCD screen with sharp objects such as pens.
• In the VCR/memory playback mode, you cannot operate with the touch panel using
the viewfinder.
To operate the items that are not displayed
Set the LCD screen and the viewfinder back to the previous position. Operate the items
using the LCD screen.
124
and then turn the LCD panel over and move it back to your camcorder body
with the LCD screen facing out (p. 28). The LCD screen is turned off.
mode) appear.
The indicator changes as follows:
FADER t M. FADER t BOUNCE t MONOTONE t OVERLAP t
WIPE t DOT t no indicator
2
In CAMERA mode
EXPO–
SURE
FADER
In the memory camera
mode
EXPO–
SURE
OK.
OK and FADER (only in CAMERA
OK.
OK
OK