Sony Handycam DCR-PC5 Operating Instructions Manual page 17

Step 3 Using a touch panel
Notes
•When using the touch panel, press operation buttons with your thumb supporting the
LCD screen from the back side of it or press those buttons lightly with your index
finger. Do not press them with sharp-pointed objects such as pens.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 141).
•When the LCD screen gets dirty, use the supplied cleanig cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Touch panel
You can operate with the touch panel using the viewfinder (p. 124).
Press FN to display the following buttons:
In CAMERA mode
PAGE1
PAGE2
PAGE3
In VCR mode
PAGE1
PAGE2
PAGE3
See p. 99 for MEMORY mode.
MENU, END SEARCH, FADER, DIGITAL EFFECT, MEMORY MIX,
EXPOSURE
TITLE, LCD BRIGHT, VOLUME
SELFTIMER
MENU, LCD BRIGHT, VOLUME, END SEARCH
TITLE, DIGITAL EFFECT, PB ZOOM
DATA CODE, REC CONTROL
17